Cable OSP CAT 6A

Cable OSP de categoría 6A, 4 pares, F/UTP, sin gel

Cable horizontal de categoría 6A para instalaciones, con clasificación OSP, 4 pares, conductores de cobre sólido desnudo de 23 AWG, F/UTP – apantallado, sin gel

OSP-Planta Exterior, Cable Horizontal de Premisa, Ethernet hasta 10GBASE-T, Wi-Fi 6, Wi-Fi 5, PoE++, PoE+, PoE, Enivronamientos Ruidosos, HDBaseT, Cámaras IP

Construction Details

CONDUCTOR

Tamaño	Tipo	Material	Numero de pares
23	Solido	BC – Cobre	4

INSULATION

Material	Código de Color
PO – Polioelefina	Blanco & Azul, Blanco & Naranja, Blanco & Verde, Blanco & Café

OUTER SHIELD

Tipo de cubierta	Material	Cubierta	Tipo de Cable
Tape	Bi-Laminado (Alum+Poly)	100%	26 AWG (7×34) TC

OUTER JACKET

Separador	Material	Diámetro	Ripcord
Center Member (Patented T-Spline®), EquiBlock Barrier Technology	PO – Polyolefin	0.29 in (7.4 mm)	Si

Diametro de Cable General (Nominal)	0.29 in (7.4 mm)

Electrical Characteristics

ELECTRICALS

Max. Conductor DCR	Max. Capacitance Unbalance
82 Ohm/km (25 Ohm/1000ft)	45 pF/100m

DELAY

Frequency	Max. Delay	Max. Delay Skew	Nom. Velocity of Prop.
100 MHz	537.6 ns/100m	45 ns/100m	68%

HIGH FREQUENCY

Frequency [MHz]	Max. Insertion Loss (Attenuation) [dB/100m]	Min. NEXT [dB]	Min. PSNEXT [dB]	Min. ACR [dB]	Min. PSACR [dB]	Min. ACRF (ELFEXT) [dB]	Min. PSACRF (PSELFEXT) [dB]	Min. RL (Return Loss) [dB]	Max./Min. Input Impedance (unFitted)	Max./Min. Fitted Impedance	Min. PSANEXT [dB]	Min. PSAACRF [dB]	Min. TCL [dB]	Min. ELTCTL [dB]
1	2.1	74.3	72.3	72.2	70.2	67.8	64.8	20.0	105 +/- 10	115 +/- 15	67.0	67.0	40.0	35.0
4	3.8	65.3	63.3	61.5	59.5	55.8	52.8	23.0	105 +/- 10	100 +/- 7	67.0	66.2	40.0	23.0
8	5.3	60.8	58.8	55.4	53.4	49.7	46.7	24.5	100 +/- 22	100 +/- 7	67.0	60.1	40.0	16.9
10	5.9	59.3	57.3	53.4	51.4	47.8	44.8	25.0	100 +/- 22	100 +/- 7	67.0	58.2	40.0	15.0
16	7.5	56.2	54.2	48.8	46.8	43.7	40.7	25.0	100 +/- 22	100 +/- 7	67.0	54.1	38.0	10.9
20	8.4	54.8	52.8	46.4	44.4	41.8	38.8	25.0	100 +/- 22	100 +/- 7	67.0	52.2	37.0	9.0
25	9.4	53.3	51.3	44.0	42.0	39.8	36.8	24.3	100 +/- 22	100 +/- 7	67.0	50.2	36.0	7.0
31.25	10.5	51.9	49.9	41.4	39.4	37.9	34.9	23.6	100 +/- 22	100 +/- 7	67.0	48.3	35.1	5.1
62.5	15.0	47.4	45.4	32.4	30.4	31.9	28.9	21.5	100 +/- 22	100 +/- 7	65.6	42.3	32.0
100	19.1	44.3	42.3	25.2	23.2	27.8	24.8	20.1	100 +/- 22	100 +/- 7	62.5	38.2	30.0
200	27.6	39.8	37.8	12.2	10.2	21.8	18.8	18.0	100 +/- 22	100 +/- 7	58.0	32.2	27.0
250	31.1	38.3	36.3	7.3	5.3	19.8	16.8	17.3	100 +/- 32	100 +/- 7	56.5	30.2	26.0
300	34.3	37.1	35.1	2.9	0.9	18.3	15.3	16.8	100 +/- 32	100 +/- 7	55.3	28.7	25.2
350	37.2	36.1	34.1			16.9	13.9	16.3	100 +/- 32	100 +/- 7	54.3	27.3	24.6
400	40.1	35.3	33.3			15.8	12.8	15.9	100 +/- 32	100 +/- 7	53.5	26.2	24.0
450	42.7	34.5	32.5			14.7	11.7	15.5	100 +/- 32	100 +/- 7	52.7	25.1	23.5
500	45.3	33.8	31.8			13.8	10.8	15.2	100 +/- 32	100 +/- 7	52.0	24.2	23.0

VOLTAGE

Voltage Rating
300 V

Mechanical Characteristics

TEMPERATURE

Operating	Installation	Storage
-20°C To +70°C	0°C To +60°C	-40°C To +75°C

BEND RADIUS

Installation Min.
2.9 in (74 mm)

Max. Pull Tension	25 lbs (11 kg)
Bulk Cable Weight	33 lbs/1000ft (49 kg/km)

Standards and Compliance

Environmental Suitability	Outdoor – Water Exposure, Outdoor
IEEE Compliance	IEEE 802.3bt Type 1, Type 2, Type 3, Type 4
Data Category	Category 6A
TIA/EIA Compliance	ANSI/TIA-568.2-D Category 6A
ISO/IEC Compliance	11801 ed 2.2 (2011) Class EA
CENELEC Compliance	Segregation class according EN50174-2 = a

Product Notes

Notes

Electrical values are expected performance based on cable testing and representative performance within a typical Belden system. Print Includes Descending Footage/Meter Markings from Max. Put-Up Length to 0. Not Suitable for Direct Burial. Cable jacket system is specially designed to protect cable core. Cable contains no water-blocking tapes, gels, or powders. Install in accordance with all applicable electrical codes. Maintain jacket integrity throughout installation process. Do not allow water or fluids to penetrate jacket sheath or to enter ends of cable. Ensure ends of cable will be protected from water/fluids after installation. Belden recommends using an entrance demarcation point when transitioning inside buildings with OSP cables. The suggested transition point is the REVConnect core coupler, part number RVACPKUBK-S1.

History

Update and Revision	Revision Number: 0.15 Revision Date: 11-01-2022

Hide Specifications

Part Numbers

Item #	Color	Putup Type	Length
DOSP6AF 0101000	Black	Reel	1,000 ft

La entrada Cable OSP CAT 6A se publicó primero en CPV MICRO.